Showing all 6 results
GREDDY ALUMINUM RADIATOR TWR INTEGRE DC5 K20A
A two-layer wide tube core made of all-aluminum
The adopted sport radiator.
By adopting the two-layer wide tube, and securing the capacity of the three-layer structure par.
Securing the cooling water volume of more than twice genuine ratio, a reduction in pressure loss achieved.
Further, by adopting the steel all aluminum, reducing the increase in weight.
I corresponds to the circuit from the street.
High pressure radiator cap included
(I except some models)
Opening pressure 127kPa of (1.3kg / cm2)
Hype Ressha type radiator cap (all models TYPE-S)
The standard equipment.
Aluminum, the buffing is adopted
It is up the strength and corrosion resistance by adopting the aluminum.
Is subjected to a buffing the tank, and fearless directing the engine room.
GREDDY RADIATOR BREATHER TANK
Designed originally for racing engines, today’s compact production engines can also benefit from the used of GReddy’s Radiator Bleed Tank. The air in the radiator causes over heating. The GReddy Breather Tank removes the air in cooling system. By the fuid swirl in the tank, Breather Tanks separate coolant from the air and will contribute to the radiator’s efficentcy. Block-off radiator cap included.
1x Aluminum Radiator Breather Tank
1x High Pressure Radiator Cap
(1.3kg/cm2 – Type S)
2x Seal Caps (Type S & N)
2x GReddy Cap Badges
2m 8mm Dia. clear silicone hose
2x optional 8mm hose fittings
1x 8mm cap
6x hose clamps
1x mounting bracket
4x bolt, nut, washer sets
SPOON EP3/DC5 SEP RADIATOR HOSE
During racing or sport driving conditions the engine will shift violently, causing the radiator hoses to collapse and crush. The extreme heat of the coolant and engine bay also reduce the strength of the hoses. When the hoses collapse, the coolant flow is disrupted and air pockets are formed, resulting in overheating.
Spoon uses SEP (silicone ethylene propylene) rubber hoses that are stronger and more heat resistant to avoid these problems. Stock hoses maintain their rigidity up to 120C; Spoon SEP is rigid up to 160C.
SPOON THERMO SWITCH
High-tension plug wires help provide a stronger spark for improved combustion.
An extremely low resistance core provides the high conductivity needed to carry a strong current to the spark plugs. The current is then shielded from the magnetic electrical interference by the hyper silicone and metal mesh cable.
Grounding each plug wire minimizes electrical noise. Furthermore, the cable material is highly heat resistant and gasoline proof, increasing the wires' life under abusive racing conditions.