Showing all 8 results
CUSCO RADIATOR COOLING PLATE IMPREZA WRX / STI GC8
-Vehicle : Subaru Impreza WRX/STi Apride A-G
-Model : GC8
-Engine Type : EJ20/EJ25
-Year : 010/1992~01/2000
-Brand : CUSCO
-Product Name : Radiator cooling plate
-Item Number : 660 003 AL
CUSCO TRANSMISSION & DIFFERENTIAL OIL COOLER KIT
-Brand : CUSCO
-Product Name : Transmission & Rear Differential Oil Cooler Kit
-Core Size : 9 Row
-Core Size : L287 x H68 x W51mm
-Oil Pump Size : Φ63 x L145mm
-Oil Filter Size : Φ36 x 95mm
-Item Number : 00B 013 A
GREDDY ALUMINUM RADIATOR TWR IMPREZA WRX GC8
A two-layer wide tube core made of all-aluminum
The adopted sport radiator.
By adopting the two-layer wide tube, and securing the capacity of the three-layer structure par.
Securing the cooling water volume of more than twice genuine ratio, a reduction in pressure loss achieved.
Further, by adopting the steel all aluminum, reducing the increase in weight.
I corresponds to the circuit from the street.
High pressure radiator cap included
(I except some models)
Opening pressure 127kPa of (1.3kg / cm2)
Hype Ressha type radiator cap (all models TYPE-S)
The standard equipment.
Aluminum, the buffing is adopted
It is up the strength and corrosion resistance by adopting the aluminum.
Is subjected to a buffing the tank, and fearless directing the engine room.
GREDDY OIL COOLER KIT STD TYPE IMPREZA WRX GC8
GReddy Oil Cooler Kit was developed to offer more cooling performance compared with the long-seller GReddy standard type oil cooler kit.
The kit comes with standard type oil block, which will allow oil lines connected onto original oil filter position. This simplified design makes the installation easier with less kit parts.
*Size and shape will vary upon vehicle application
GREDDY RADIATOR BREATHER TANK
Designed originally for racing engines, today’s compact production engines can also benefit from the used of GReddy’s Radiator Bleed Tank. The air in the radiator causes over heating. The GReddy Breather Tank removes the air in cooling system. By the fuid swirl in the tank, Breather Tanks separate coolant from the air and will contribute to the radiator’s efficentcy. Block-off radiator cap included.
1x Aluminum Radiator Breather Tank
1x High Pressure Radiator Cap
(1.3kg/cm2 – Type S)
2x Seal Caps (Type S & N)
2x GReddy Cap Badges
2m 8mm Dia. clear silicone hose
2x optional 8mm hose fittings
1x 8mm cap
6x hose clamps
1x mounting bracket
4x bolt, nut, washer sets
STI 1.3 BAR HIGH PRESSURE RADIATOR CAP IMPREZA WRX / STI GC8
Improve your cooling system while spicing up your engine bay with a Subaru Genuine Cherry Blossom Rose radiator cap. This cap is a higher pressure then the cap that came stock on your vehicle. By raising the pressure in the cooling system you raise the temperature at which it boils allowing it to hold in more heat.