Showing all 8 results
CUSCO TRANSMISSION & DIFFERENTIAL OIL COOLER KIT
-Brand : CUSCO
-Product Name : Transmission & Rear Differential Oil Cooler Kit
-Core Size : 9 Row
-Core Size : L287 x H68 x W51mm
-Oil Pump Size : Φ63 x L145mm
-Oil Filter Size : Φ36 x 95mm
-Item Number : 00B 013 A
GREDDY ALUMINUM RADIATOR TWR LEVIN / TRUENO AE86
A two-layer wide tube core made of all-aluminum
The adopted sport radiator.
By adopting the two-layer wide tube, and securing the capacity of the three-layer structure par.
Securing the cooling water volume of more than twice genuine ratio, a reduction in pressure loss achieved.
Further, by adopting the steel all aluminum, reducing the increase in weight.
I corresponds to the circuit from the street.
High pressure radiator cap included
(I except some models)
Opening pressure 127kPa of (1.3kg / cm2)
Hype Ressha type radiator cap (all models TYPE-S)
The standard equipment.
Aluminum, the buffing is adopted
It is up the strength and corrosion resistance by adopting the aluminum.
Is subjected to a buffing the tank, and fearless directing the engine room.
GREDDY OIL COOLER KIT STD TYPE LEVIN / TRUENO AE86
GReddy Oil Cooler Kit was developed to offer more cooling performance compared with the long-seller GReddy standard type oil cooler kit.
The kit comes with standard type oil block, which will allow oil lines connected onto original oil filter position. This simplified design makes the installation easier with less kit parts.
*Size and shape will vary upon vehicle application
GREDDY OIL FILTER RELOCATION KIT LEVIN / TRUENO AE86
Oil Fiter Relocation Kits allow you to relocate the factory oil filter for easy maintenance with a sporty look. Billet adapters allow for easy installation of gauge sensors, such as oil pressure and oil temperature. Also included are brackets, Earl's fittings and perform-O-flex hoses (use of of GReddy QX-01, QX-03, SX-01, SX-03 or 1985-87 Toyota Corolla GTS Oil filter required).
GREDDY RADIATOR BREATHER TANK
Designed originally for racing engines, today’s compact production engines can also benefit from the used of GReddy’s Radiator Bleed Tank. The air in the radiator causes over heating. The GReddy Breather Tank removes the air in cooling system. By the fuid swirl in the tank, Breather Tanks separate coolant from the air and will contribute to the radiator’s efficentcy. Block-off radiator cap included.
1x Aluminum Radiator Breather Tank
1x High Pressure Radiator Cap
(1.3kg/cm2 – Type S)
2x Seal Caps (Type S & N)
2x GReddy Cap Badges
2m 8mm Dia. clear silicone hose
2x optional 8mm hose fittings
1x 8mm cap
6x hose clamps
1x mounting bracket
4x bolt, nut, washer sets
TRD RADIATOR CAP
Increasing the pressure inside the radiator to raise the boiling point (by increasing the valve opening pressure of the radiator cap) will control air bubbles. This improves the cooling effect and optimizes the radiators cooling function.
*Relief pressure 127kPa(1.3kgf/cm²)
Recommended for use in driving environments where the engine exerts high RPM (such as winding roads and racing circuits).